Accessories
Optional accessories for CR-400 / 410
Granular Attachment CR-A50
For measurements of powders, pastes, grains or other small sized
granular material. The low reflectance glass plate protects the
sample surface against disorientation and prevents specimen
material to enter the instrument. The set includes one retaining
ring each to adjust the measuring area accordingly to either
CR-400 or CR-410.
-
Item
Order Code: 1829-751
Glass Plate for CR-A50, CR-A51
Replacement low reflectance glass plate for CR-A50 Granular
Attachment.
-
Item Order
Code: 1829-752
Retaining Ring Set CR-A52
Replacement ring set for CR-A50 Granular Attachment. The set consist
of one ring each for CR-400 and CR-410.
-
Item Order
Code: 1829-753
Light Protection Tube with glass protection plate CR-A33a (only for
CR-400)
Light projection tube for measurement of pasty, wet or moist
samples. The convex protection glass plate prevents specimen
from entering the instrument. The CR-A33a is recommended for
soft specimen. The diameter of the plate is 22 mm.
-
Item
Order Code: 1849-731
Light Protection Tube with plate 40 mm CR-A33b (only for CR-400)
Standard light projection tube with 40 mm plastic disc. Provides
high stability on the sample. Recommended for all standard
applications.
-
Order Item
Code: 1849-732
Light Protection Tube without plate CR-A33c (only for CR-400)
Light projection tube without plate for measurements on small
samples where the 40 mm or 22 mm plate is too large.
-
Item
Order Code: 1849-733
Light Protection Tube with plate 22 mm CR-A33d (only for CR-400)
Light projection tube with a plate of 22 mm
diameter. Allows measurements on small specimen with high stability
against tilting of the measuring head.
-
Item Order
Code: 1849-734
Light Protection Tube with Glass Protection CR-A33f (only for
CR-400)
Light projection tube for measurement of soft
samples. The concave protection glass plate prevents specimen
from entering the instrument. The CR-A33a is recommended for
flattening soft or soft and wet specimen. The diameter of the
plate is 22 mm diameter.
-
Item
Order Code: 1849-736
Pivoting Base CR-A12 (only for CR-400)
Recommended for the measurement of flat samples.
The large base plate increases the stability and the clear marked
target area provides a precise positioning. The CR-A12 Pivoting Base
set includes the Light Protection Tube CR-A33c (without plate).
-
Item Order
Code: 1849-741
Hard Case (only for CR-400)
For comfortable hand carrying and storage of
measuring head, data processor and accessories.
-
Item Order
Code: 1878-600
Data Cable CR-A102 RS232c
Connection cable between measuring head or data
processor and PC. For PC terminals with 9 pin SUB-D connecter.
Length of the cable 2 m.
-
Item Order
Code: 1878-704
Glass Cell CR-A502 (only for CR-410)
Glass Cell made of optical glass for measurements
of powders, pastes, grains and small granular materials. Diameter of
the cell 55 mm. For precise positioning the Cell Holder CR-A501 is
recommended.
-
Item Order
Code: 9970-220
Cell Holder CR-A503 (only for CR-400)
For measurements of powders, paste and grains
in combination with the Glass Cell CR-A504. The measuring head
is set to up-side down position and the Cell Holder CR-A503
precisely fixes the position of the Glass Cell CR-504. To secure
the instrument in a safe position against tipping the Vertical
Stand USD CM-A516 is recommended.
-
Item
Order Code: 9970-1003
Glass Cell CR-A504 (only for CR-400)
Glass Cell made of optical glass for measurements
of powders, pastes, grains and small granular materials. Diameter of
the cell 34 mm. For precise positioning the Cell Holder CR-A503 is
recommended.
-
Item Order
Code: 9970-2504
Sample Holder CR-A505 (only for CR-400)
Base holder to set the measuring head in
horizontal position. Allows in combination with the Specimen
Holder CM-A96 measurements of small samples up to a thickness of
22.5 mm or with the Glass- or Disposal Cells with 10 or 20 mm
optical path the measurement of opaque liquids.
-
Item
Order Code: 9970-441
Transmittance Specimen Holder CM-A96 (only for CR-400)
Required to fix opaque samples or the Glass
or Disposal cells for measurement of opaque liquids in
combination with the Sample Holder CR-A505. The clamp provides a
constant pressure to the sample and the moveable side holders
keep the cells in correct position.
Glass Cell 10 mm CM-A98 (only for CR-400)
Glass Cell made of optical glass with an optical
path of 10 mm. Recommended for precise reflectance measurements of
opaque liquids in combination with Sample Holder CR-A505 and
Specimen Holder CM-A96.
Glass Cell 20 mm CM-A99 (only for CR-400)
Glass Cell with made of optical glass with an
optical path of 20 mm. Suitable for precise reflectance
measurements of opaque liquids with lower density in combination
with Sample Holder CR-A505 and Specimen Holder CM-A96.
Plastic Cell 10 mm CM-A131 (only for CR-400)
Disposal plastic cell with an optical path of 10
mm. Suitable for reflectance measurements of water based opaque
liquids in combination
with Sample Holder CR-A505 and Specimen Holder CM-A96.
Plastic Cell 20 mm CM-A132 (only for CR-400)
Disposal plastic cell with an optical path of 20
mm. Suitable for reflectance measurements of water based opaque
liquids with lower density or opaque paste in combination with
Sample Holder CR-A505 and Specimen Holder CM-A96.
Shoulder Case CR/CM (for CR-400 Head and CR-410 Head)
Small, compact and comfortable softcase for
measuring head, white calibration tile and other small
accessories.
Flow Cell CM-A508 (only for CR-400)
For continuous measurements of opaque liquids in
reflectance mode. The optical path of the cell is 10 mm and the max.
pressure is up to 2 Bar. For the positioning of the Flow Cell
CM-A508 the horizontal aligned Sample Holder CR-A505 and the Sample
Holder CM-A96 are required.
-
Item Order
Code: 9970-237
Shoulder Case CR
The shoulder case increases the movability for
field measurement. The DP-400 can be operated through the
transparent Vinyl cover, a slit for the paper allows print out of
the measurement data without taking off the case. An integrated
holster keeps the measuring head always ready for measurement and
the calibration tile can be stored safely in a small bag at the
side.
-
Item Order
Code: 9999-905
Light Protection Tube with Glass Protection CR-A33e (only for
CR-410)
Light projection tube for measurement of
pasty, wet or moist samples. Also suitable to measure grains or
granular specimen in bags. The protection glass plate prevents
specimen from entering the instrument.
Hard Case CR-A103 (only for CR-410)
For comfortable hand carrying and storage of
measuring head, data processor and accessories.
-
Item Order
Code: 1878-600
Cell Holder CR-A501 (only for CR-410)
For measurements of powders, grains and
granular materials in combination with the Glass Cell CR-A504.
The measuring head is set to up-side down position and the Cell
Holder CR-A501 precisely fixes the position of the Glass Cell
CR-502.
-
Item
Order Code: 9970-219
Glass Cell CR-A502 (only for CR-410)
Glass Cell made of optical glass for measurements
of powders, grains and granular materials. Diameter of the cell 50
mm. For positioning the Cell Holder CR-A503 is required.
Vertical Stand USD CM-A516
The CM-A516 Vertical allows to align the
instrument in Up-Side-Down position and secures that the
instrument cannot get out of balance
by using the Cell-Holder CR-A503 for CR-400 and CR-A501 for
CR-410.
